DKS LOGO
 
| |
| 
 

Product sheet

Picture Combiner BT03

 

Article Number:       501232

 

Short description:

       Digital image separator vertical or horizontal

       RS422 interface

       19" rack mount unit

       Two full screen buffers

       Optocoupler input for switching full screen/half screen

       OSD / text insertation

       Horizontal / vertical displacement

       Input reflexion

Specification

 

Standard:

CCIR 625Z/50Hz Pal

Video inputs:

2 BNC, decoupled loop through inputs

Video outputs:

2 BNC, decoupled loop through outputs

Video outputs:

2 BNC, decoupled outputs

Video input level / impedance

1 Vss 75 Ohm

Video output level / impedance

1 Vss 75 Ohm

Image memory:

2 x (4 x 256 k)

Sample rate:

13.5 MHz 4:2:2

Resolution:

720 x 576

Linearity:

1 %

Diff. Phase:

1.5°

Diff. Gain:

1.5 %

Droop:

0.5 %

Signal/noise ratio:

>58 dB rated

Operational voltage:

9 - 36 V DC

Power input:

about 7.5 VA

Operation temperature:

+10 °C to +40 °C

Humidity:

90 % non-condensing

Design:

19" Cassette (aluminium)

Dimensions (W x H x D):

61 mm x 129 mm x 160 mm
(12 TE x 3 HE)

Weight:

about 0.6 kg

Meets the following CE-Standards:

 

Emitted interference

EN 55022

Burst

EN 610004-4

ESD

EN 610004-2

Surge

EN 610004-5

Net interrupt

EN 610004-11

Interference resistance

EN 610004-6

Interference resistance

EN 610004-3

 

 

Description of functions

With the Image Separator BT03, two video images can be separated horizontally or vertically. By separating, the left-hand half of the image of the first camera will be displayed on the left-hand side of the screen; the right-hand half of the image of the second camera will be displayed on the right-hand side of the screen. By choosing horizontal image separation, both cameras will be separated in the centre of the image. Upper half of the image- first camera, lower half of the image- second camera.

Synchronisation of the cameras is not necessary since the BT03 provides cable length equalisation for both cameras.

Each image can be moved horizontally by a line’s width, thus allowing a correction of the image position via the BT03 and not by moving the cameras.

Both camera images can be displayed as reflexion.

Using the supplied computer software the BT03 can be comprehensively configured.

 

Accessories:

 

Article Number

Description

500483

Construction set BT03

500460

Module rack BGT230 with power supply 230 V

500544

RS232/RS485-RS422-Converter

All information provided in this product sheet refers to the current conditions and may be subject to change.

 

 

Copyright © DKS Dienstleistungsgesellschaft für Kommunikationsanlagen des Stadt- und Regionalverkehrs mbH 2005

Robert-Perthel-Str. 79 • 50739 Köln • Phone +49-221-95 44 42-0 • Fax +49-221-95 44 42-23
© 2005